Netherland's TAT-14 Cable Landing Station Photos - Part 2

As mentioned in my first post, the TAT-14 subsea network suffered notorious outages, particularly on the Bude/Denmark segment where the cable hugged the Danish, Dutch and Belgium coasts and then traversed the English Channel's busy shipping lanes. About 85% of cable damage world wide occurs in waters one thousand meters deep or less. The two main culprits are fishing and ship anchors. Unfortunately, technology at the time permitted only shallow burial on the continental shelf off the Netherlands, Belgium, and through the English Channel. One meter was the max, but average burial much less, probably only 30 to 50 centimeters. This same region is known for sand waves, horizontal currents that can move several meters of sea floor deposit and disinter a buried cable. The design combined with shallow burial was a recipe for disaster. 

The consortium was certainly aware that their design was high risk, but every member wanted a landing and the consensus was that a ring mitigated the risk of the Bude/Denmark segment. This is why engineering expertise is not enough in a multi-owner project to ensure a rational design. The self interest of a consortium member can lead it to advocate designs that harm the general welfare. Each member naturally wanted a landing in their country and the ring architecture forced the cable to traverse unfriendly waters. 

Photo of A Computer Screen at the Dutch TAT-14 CLS Showing the Network



Comments

Popular posts from this blog

The British Empire's Resilient Subsea Telegraph Network

The Short Life Expectancy of Starlink's LEO Satellites

Southern Cross Subsea Cable Network Deploys Ciena's Granular Layer 1 Wavelength Product